Does a third-party SFP work in a Cisco, Juniper, Arista or MikroTik switch?

Short answer

Yes, if the transceiver is coded for that vendor: the switch then reads it as its own optic and the port comes up as normal. We code every module for your platform before it ships, at no extra cost.

Updated November 20, 2026

Every switch reads the transceiver's EEPROM when you plug it in: manufacturer, part number, serial number and a checksum. What it does with an unknown name differs per vendor. That's why the product page of every transceiver, and of our 40G and 100G DACs, has a Coding field where you pick the vendor of your equipment, and we program the module before shipping. It costs nothing extra. The 10G DAC has no such field: if your switch expects a specific coding, ask us before you order. Fiber cables have no coding.

What each vendor does with an uncoded module

VendorUncoded (MSA) moduleWith vendor coding
Cisco (IOS, IOS-XE, NX-OS)"unsupported transceiver", port often err-disabled; only allowed with a hidden, unsupported commandRecognised as a Cisco optic, port comes up
Juniper (Junos)Port usually comes up, but without a Juniper part number and possibly with an alarmReports as a Juniper optic
Arista (EOS)Port errdisabled by default; allowing it needs a licence key from AristaRecognised as an Arista optic, no key needed
MikroTik (RouterOS)Usually works, RouterOS has no vendor lockYou see the MikroTik name and clean DOM values

On MikroTik, coding is mostly about tidiness; on Cisco and Arista it's the difference between a port that comes up and one that stays down.

What you get from us

  • Coding for 21 vendors — from Cisco, Juniper and Arista to MikroTik, Ubiquiti, Fortinet, Aruba and NVIDIA (Mellanox). Pick "MSA (Generic)" for equipment without a vendor check.
  • Tested — the modules come from Solid Optics, a Dutch company that tests every transceiver and backs it with a lifetime warranty.
  • Fast — we ship from Almere, the Netherlands; pickup is possible too.
  • Re-coding later — new switch from another vendor? Bring your modules to us in Almere by appointment and we re-code them free of charge. On site works too, with call-out costs.

Each vendor has its own page listing which OEM part number every module replaces: Cisco, Juniper, Arista and MikroTik. For how coding works under the hood, read third-party optics and coding. If a module keeps getting rejected, see transceiver not recognized.

More questions on this

What exactly is coding?

Every transceiver has a small EEPROM holding the manufacturer name, part number and serial number, at fixed offsets defined by SFF-8472 (SFP) and SFF-8636 (QSFP). Coding means filling that memory the way your switch vendor expects. Nothing changes in the optics.

Can a coded module be re-coded for another vendor later?

Usually yes. Bring the module to us in Almere (by appointment) and we re-code it free of charge; if we do it at your site, we charge call-out costs. The exception is HPE/Aruba coding, which cannot go back to another vendor. So order for the platform the module is going into.

Do I lose support from Cisco or Juniper?

Your contract on the switch stays valid. Cisco may withhold support if a fault is traced to a third-party part, and Juniper's JTAC does not support optics Juniper hasn't qualified. In practice they ask you to reproduce the fault with a genuine optic.

Passende Produkte und Dienstleistungen

Further reading

Other questions