Which SFP do I need for 10G over multimode?
A 10GBASE-SR SFP+ (850 nm, LC duplex): it reaches 300 m over OM3 and 400 m over OM4. On older OM1 or OM2 fiber you get much less, and LR or other single-mode optics don't belong on multimode.
You have a 10G port and multimode in the building or data center. Then the answer is almost always an SR optic. The only thing you need to know is which type of multimode is installed, because that decides how far you get.
Reach per fiber type
| Fiber | Core | Max. distance 10GBASE-SR |
|---|---|---|
| OM1 | 62.5 µm | 33 m |
| OM2 | 50 µm | 82 m |
| OM3 | 50 µm | 300 m |
| OM4 | 50 µm | 400 m |
| OM5 | 50 µm | 400 m |
Source: Cisco's SFP-10G-SR datasheet, matching IEEE 802.3. The differences come from the fiber's modal bandwidth: OM3, OM4 and OM5 are made for 850 nm lasers, OM1 and OM2 are not. For 10G SR, OM5 adds nothing over OM4.
What to order
- The optic — an SFP-10G-SR, the same at both ends, coded for the vendor of each switch. With two vendors on one link, you pick the right coding per module.
- The patch cord — duplex LC-LC in OM4 or OM3. Use the same type as the fixed cabling, or better.
- No single-mode — an LR optic or a yellow OS2 cable isn't specified for a multimode link. Don't, even if the connector fits.
When not SR
If the distance is longer than your multimode can handle, there's no other 10G multimode optic in our range; you need single-mode. If it stays within the rack, a DAC is cheaper and uses less power. More on fiber types in single-mode or multimode.
More questions on this
How do I tell which multimode is installed?
Read the print on the jacket: it says OM1 to OM4 or the core size (50 or 62.5 µm). Colour helps, aqua is usually OM3 (sometimes OM4), violet often OM4, lime green OM5 and orange OM1 or OM2, but the print is what counts.
Can I mix OM3 and OM4?
Yes. Both have a 50 µm core and the same connectors. The link then gets the reach of the weaker fiber, so 300 m instead of 400 m.
Do I need two fibers?
Yes. An SR optic transmits on one fiber and receives on the other, with an LC duplex connector. A duplex LC-LC patch cord does the job.
Passende Produkte und Dienstleistungen
Further reading
- Fiber patch cable color codes: what yellow, aqua, orange and violet mean
Yellow, aqua, orange, violet, a blue or green connector: what fiber patch cable colors mean under TIA-598, and why you still read the print on the jacket.
- Single-mode vs multimode: OS2, OM3 and OM4 compared
OS2 or OM4, OM3 or OM4? Distances per standard, what optics and fiber really cost, and when you're better off running single-mode everywhere.
- Reach codes decoded: SX, LX, SR, LR, ER, ZR
SFP LX vs SX and 10GBASE-SR vs LR: what each reach code means, which come from IEEE 802.3, which fiber and wavelength they need, and how to choose.