We program this SFP-1G-LX with Cisco coding before shipping, at no extra cost. Your Cisco equipment (Catalyst, Nexus, ISR, ASR) then sees it as its own optic, just like a GLC-LH-SMD. Optically it's the same SFP transceiver: 1000BASE-LX, up to 10 km over OS2.
Cisco IOS, IOS-XE and NX-OS read the module's vendor ID and checksum on insertion. Without Cisco coding you usually get an 'unsupported transceiver' message and the port goes err-disabled; 'service unsupported-transceiver' is a hidden, unsupported command. With Cisco coding the switch recognises the module as a Cisco optic and that command isn't needed.
Replaces these Cisco part numbers Need another coding or generic (MSA)? All specs and codings are on SFP-1G-LX transceiver
All Cisco compatible transceivers
Compatible means: the same optical specs and Cisco coding, not an original Cisco product. Brand and part names belong to their owners and are shown for comparison.
The SFP-1G-LX is an SFP transceiver for 1000BASE-LX: 1 Gb/s over single-mode fiber (OS2) up to 10 km, at 1310 nm, with LC duplex connector and DOM/DDM monitoring. Replaces GLC-LH-SMD, EX-SFP-1GE-LX, JD119B and J4859D, among others. Available generic (MSA) or pre-coded for 21 vendors, including Cisco, Juniper and Brocade: pick your equipment's vendor under Coding and we code it before shipping, at no extra cost. Tested, with test report and lifetime warranty.
Matching cable: OS2 LC-LC patch cable
Also known as: SFP-1G-LX - SFP 1000BASE-LX - SFP LX - 1G LX - 1G SFP 10 km
Same transceiver, pre-coded for your platform. Each vendor shows the original part number it replaces.