Juniper compatible SFP-25G-LR transceiver

Juniper coding for the SFP-25G-LR

We program this SFP-25G-LR with Juniper coding before shipping, at no extra cost. Your Juniper equipment (EX, QFX, MX, SRX, ACX) then sees it as its own optic, just like a JNP-SFP-25G-LR. Optically it's the same SFP28 transceiver: 25GBASE-LR, up to 10 km over OS2.

Junos usually doesn't block third-party modules, but lists them in 'show chassis hardware' without a Juniper part number, may raise an 'unsupported optics' alarm and can limit JTAC support for that port. With Juniper coding the module reports as a Juniper optic, including DOM readout via 'show interfaces diagnostics optics'.

Need another coding or generic (MSA)? All specs and codings are on SFP-25G-LR transceiver

Compatible means: the same optical specs and Juniper coding, not an original Juniper product. Brand and part names belong to their owners and are shown for comparison.

About the SFP-25G-LR

The SFP-25G-LR is an SFP28 transceiver for 25GBASE-LR: 25 Gb/s over single-mode fiber (OS2) up to 10 km, at 1310 nm, with LC duplex connector and DOM/DDM monitoring. Available generic (MSA) or pre-coded for 21 vendors, including Cisco, Juniper and Brocade: pick your equipment's vendor under Coding and we code it before shipping, at no extra cost. Tested, with test report and lifetime warranty.

Matching cable: OS2 LC-LC patch cable

Also known as: SFP-25G-LR - SFP28 25GBASE-LR - SFP28 LR - 25G LR - 25G SFP28 10 km