Does an SFP28 fit in an SFP+ port?

Short answer

It fits, because SFP, SFP+ and SFP28 share the same housing, but an SFP+ port won't do 25G. Whether the module falls back to 10G depends on module and switch; for an SFP+ port, just buy an SFP+.

Updated November 20, 2026

You have an SFP28 module lying around and a switch with SFP+ ports, or the other way round. The housing is identical, so physically it goes in. Whether it works depends on the speed the port can do and what the switch allows.

What works where

ModuleIn portResult
SFP28 (25G)SFP+ (10G)fits, no 25G; 10G only if module and switch support it
SFP+ (10G)SFP28 (25G)often 10G, depending on the switch
SFP (1G)SFP+ (10G)often 1G, not on every switch
QSFP+ (40G)QSFP28 (100G)40G if the switch supports it
QSFP28 (100G)QSFP+ (40G)no 100G

The rule: a faster module in a slower port never runs faster than the port, and a slower module in a faster port only works if the port supports that speed. The MSAs (SFF-8431 for SFP+, SFF-8402 for SFP28) define the module, not which speeds a switch port must accept.

What to order

  • SFP+ port — a 10G SFP+ in the reach you need. That's cheaper than an SFP28 running at 10G, and there's no doubt.
  • SFP28 port at 25G — an SFP28, for example the 25G SR for multimode. Make sure both ends use the same FEC setting.
  • SFP in a QSFP port — only with a QSA adapter or a breakout cable, and the switch has to support it.

How the form factors fit together is in SFP vs SFP+ vs SFP28 vs QSFP28. Not sure what your switch accepts? Call an engineer.

More questions on this

Does an SFP+ work in an SFP28 port?

Often, at 10G. Many SFP28 ports support 10G, but it differs per platform and no MSA guarantees it. Check your switch's datasheet or compatibility matrix.

Does a 1G SFP work in an SFP+ port?

On many switches, yes, but not on all. No MSA requires an SFP+ port to do 1G. Check your switch's datasheet for the speeds the port supports.

Can I put a QSFP+ in a QSFP28 port?

If your switch supports it, it runs at 40G. The other way round, a QSFP28 in a QSFP+ port, won't do 100G.

Related products and services

Further reading

Other questions