Solid Optics QSFP-100G-BX40U-SO transceiver

On backorder – delivery in ± 5 business days

QSFP28 - 100G BiDi BX40-U - 40 km - TX 1304.58 nm / RX 1309.14 nm - OS2

1. Distance
2. Side of the link

BiDi only works as a pair over one fibre: this U on one end, QSFP-100G-BX40D-SO on the other, at the same distance. Which end is U doesn't matter technically, as long as the other end is D.

Coding

Pick the vendor of your switch or router, for example Juniper. We code the module for that platform before shipping, at no extra cost. MSA (Generic) is for equipment without a vendor check.

Available coded for 21 vendors

Cisco, Juniper, Brocade, Arista, Huawei, HPE, Aruba (HPE), Dell, Extreme, Nokia, Mellanox/NVIDIA, Alcatel-Lucent, Fortinet, Palo Alto Networks, Ciena, Calix, MikroTik, Ubiquiti, Netgear, D-Link and Allied Telesis. Vendor not listed? Ask us.

Configuration
Distance
40 km
Wavelength
1304.58nm TX/1309.14nm RX
SKU
QSFP-100G-BX40U-SO
Specifications
General
Form factor
QSFP28
Data rate
100 Gb/s
Standard
100G BiDi BX40-U
Media
OS2 (single-mode)
Connector
LC simplex
Reach
40 km
DOM/DDM
Yes
Optical
Wavelength
TX 1304.58 nm, RX 1309.14 nm
TX power
1.7 to 7.1 dBm
RX sensitivity
-16 dBm
RX overload
-2.4 dBm
Power budget
17.7 dB
BiDi side
U, pairs with QSFP-100G-BX40D-SO
Environment
Operating temperature
0 to 70 °C (COM)
Download datasheet (PDF)
1 600,00 €
excl. VAT

1 936,00 € incl. VAT

Pricing is based on your current configuration.

On backorder – delivery in ± 5 business days
1

Nxt-Level Service

We offer same-day delivery and installation to keep your infrastructure up and running without delay.

Same-day Amsterdam

≤ 45km from Almere

We deliver to datacenters at Science Park, Zuidoost and Schiphol-Rijk, incl. Equinix, Digital Realty, Nikhef and Maincubes.

Same-day NL

> 45km from Almere

Urgent delivery available for other datacenters or customer sites.

Optics from Solid Optics

  • Lifetime warranty from Solid Optics on every transceiver
  • A test report with every unit
  • Tested on the platform the optic is meant for
  • Not sure? We test on your equipment first
  • Ships from Almere, same-day delivery in Amsterdam available
See our services →

About the QSFP-100G-BX40U

The QSFP-100G-BX40U is a QSFP28 transceiver for 100G BiDi BX40-U: 100 Gb/s over single-mode fiber (OS2) up to 40 km, at TX 1304.58 nm / RX 1309.14 nm, with LC simplex connector and DOM/DDM monitoring. BiDi runs over a single fiber: fit the QSFP-100G-BX40D at the other end. Together they form a U/D pair, so always order both. Available generic (MSA) or pre-coded for 21 vendors, including Cisco, Juniper and Brocade: pick your equipment's vendor under Coding and we code it before shipping, at no extra cost. Tested, with test report and lifetime warranty.

Also known as: QSFP-100G-BX40U - QSFP28 100G BiDi BX40-U - QSFP28 BX40-U - 100G BX40-U - 100G BiDi QSFP28 40 km - 100G QSFP28 40 km

QSFP28-100G-BiDi: all versions

VersionStandardReachWavelengthMediaPrice excl. VAT
QSFP-100G-BX20U100G BiDi BX20-U20 km1290/1310 nmOS2990,00 €Backorder
QSFP-100G-BX20D100G BiDi BX20-D20 km1310/1290 nmOS2990,00 €Backorder
QSFP-100G-BX40U100G BiDi BX40-U40 km1304.58/1309.14 nmOS21 600,00 €Backorder
QSFP-100G-BX40D100G BiDi BX40-D40 km1309.14/1304.58 nmOS21 600,00 €Backorder

QSFP28 100G BiDi: how to pick the right pair

Need 100G between two sites but only have one fiber, or don't want to lease your dark fiber twice? Then you need a 100G BiDi QSFP28. Below: which pair to order, the difference between 20 and 40 km, and what to watch for on a short link.

One fiber, two wavelengths

A 100GBASE-LR4 uses two fibers with a duplex LC. A BiDi QSFP28 transmits and receives over a single single-mode fiber, each direction on its own wavelength, and a built-in WDM filter separates the two. All our BiDi modules have a simplex LC connector: one fiber, one LC.

Always order a pair: U and D

A link only works with a U module at one end and a D module at the other. Two U's or two D's will never give you link. Note: the price is per module. For one link you order two, for example QSFP-100G-BX20U-SO plus QSFP-100G-BX20D-SO.

  • 20 km — QSFP-100G-BX20U-SO (transmits 1290 nm, receives 1310 nm) and QSFP-100G-BX20D-SO (transmits 1310 nm, receives 1290 nm)
  • 40 km — QSFP-100G-BX40U-SO (transmits 1304.58 nm, receives 1309.14 nm) and QSFP-100G-BX40D-SO (transmits 1309.14 nm, receives 1304.58 nm)

The 40 km wavelengths are two channels from the LAN-WDM grid that 100GBASE-LR4 also uses. They are only 4.56 nm apart, so the filter in the module has to be precise. Never combine a BX20 with a BX40: the wavelengths don't match.

Short link? Do the power maths

The BX40 has an APD receiver and a transmitter up to +7.1 dBm, while its receiver overloads above −2.4 dBm. On a short link you therefore need an attenuator. Only pick the BX40 when the BX20 can't cover your distance or power budget, and read the RX power via DOM after plugging in.

Coding for your platform

Many switches read the vendor ID from the optic's EEPROM and log a warning or keep the port down for a module they don't recognise. So pick your platform under coding: Cisco, Juniper, Arista, Mellanox/NVIDIA or one of the other vendors in the list. We code the module before it ships.

Need less bandwidth? Pick the SFP+ 10G BiDi or the SFP 1G BiDi. Want a spare pair ready for when an uplink drops? Read how to sort spares and same-day replacement.

Frequently asked questions

Is a 100G BiDi priced per pair or per module?

Per module. One link needs a U and a D module, so you order two: for example QSFP-100G-BX20U-SO and QSFP-100G-BX20D-SO.

Which wavelengths does a 100G BiDi use?

The BX20 runs on 1290 and 1310 nm: the U module transmits at 1290 nm, the D module at 1310 nm. The BX40 runs on 1304.58 and 1309.14 nm: the U module transmits at 1304.58 nm, the D module at 1309.14 nm.

Can I connect a 100G BiDi to a 100GBASE-LR4?

No. An LR4 uses two fibers and four wavelengths per direction. A BiDi link needs a BiDi module at both ends: one U and one D of the same type.

Which connector does the 100G BiDi have?

A simplex LC connector, since you only use one fiber. If your fiber comes in on SC, use an SC-LC patch cord.

Related products