Practical articles on transceivers, cabling and the data centre. What works, what doesn't, and why.
Questions and answersOnly one fiber but you need 100G? How a 100G BiDi QSFP28 works, how it differs from 1G and 10G BiDi, BX20 or BX40, FEC, attenuators and what to order.
5 min read
LR4, CWDM4 or single-lambda DR1, FR1 and LR1? How they differ in lanes, PAM4 and FEC, which ones interoperate, and what to pick with 400G on the roadmap.
5 min read
Planning a 400G spine/leaf or DCI upgrade? How to choose between QSFP-DD and OSFP and between SR8, DR4, XDR4, FR4, LR4 and ZR, with breakout, power and FEC.
5 min read
High loss, CRC errors, or about to patch new links? How to inspect and clean connectors, bulkheads and transceiver ports, with a printable checklist.
5 min read
RJ45 in an SFP or SFP+ port? What a 1G-T or 10G-T module draws, how hot it runs, how far it reaches, and when a DAC or fiber is the smarter choice.
5 min read
CRC errors climbing on your uplink? Read DOM on both ends, find the real cause, and swap the transceiver last. A troubleshooting order backed by data.
6 min read
Connecting your rack to a carrier, AMS-IX or cloud on-ramp? What a cross-connect is, what the LOA says, real lead times and how to test the link.
5 min read
One fiber pair and not enough capacity? How CWDM and DWDM differ in wavelengths, channels, distance and cost, and when to pick which.
5 min read
Passive DAC, active copper, AOC or transceivers with a patch cord? Reach, power, cost, cable bulk, breakout and coding compared, plus a checklist.
5 min read
DAC, AOC or optics in the rack? Where latency in a short link really comes from, why a passive DAC wins, and when those nanoseconds are worth chasing.
5 min read
A TIA-606 labeling scheme for rack, patch panel, port and patch cable: what goes on the label, what goes in NetBox, and how remote hands find the right cable.
5 min read
Switch rejects your optic? The command or setting per platform to allow third-party optics, what it costs you in support, and why the right coding is better.
5 min read
Light levels fine, link still down or full of errors? It's often FEC. Which link needs which FEC, why a mismatch kills the link, and how to read the counters.
5 min read
Yellow, aqua, orange, violet, a blue or green connector: what fiber patch cable colors mean under TIA-598, and why you still read the print on the jacket.
4 min read
Which fiber patch cable lengths exist, how to measure patch panel to switch, and why one size up beats one that's 20 cm short.
4 min read
G.657.A1, A2 or G.652.D on a single-mode patch cord? What the codes mean, which bend radius and macrobend limits apply, and what bend-insensitive won't fix.
5 min read
Your switch shows 38 mA laser bias current or a bias high alarm. What the number means, why there's no fixed normal and which pattern really points to wear.
5 min read
LC/UPC, SC/APC, duplex or simplex: how to read the connector code, tell what's on your switch, ODF or fiber wall socket, and order the right patch cord.
5 min read
Planning 40G, 100G or 400G, or a dense row of racks? When MPO trunks with cassettes pay off, when duplex LC is enough, and where polarity goes wrong.
5 min read
An 8 km link with four patch points: will an LR do, or is it marginal? How to work out power budget, link loss and margin, with three worked examples.
5 min read
OS2 or OM4, OM3 or OM4? Distances per standard, what optics and fiber really cost, and when you're better off running single-mode everywhere.
4 min read
Remove the KPN box and plug the fiber straight into your own router? How to tell AON, GPON and XGS-PON apart, which SFP or ONT you need and what to configure.
5 min read
One 100G port, four 25G servers or switches? When to pick a breakout DAC or AOC, when SR4 or PSM4 with an MPO fanout, and what to configure first.
5 min read
Dead optic or a turn-up that has to happen today? What to tell us, how to pick the coding and how the optic gets from receiving into your rack.
5 min read
No link, or a link that keeps flapping? A printable checklist in the right order: port, BiDi pair, reach, fiber, connectors, DOM, too much light and the swap test.
5 min read
Yearly spares check per site: count your spare optics, check coding after upgrades and hardware swaps, test them and review your SLAs. With a printable checklist.
4 min read
Rolling out dozens or hundreds of optics? How to test coding, recognition, DOM, link and errors up front, how long to soak them and what to record per port.
5 min read
What coding in a transceiver's EEPROM does, why switches check it, what you actually risk with third-party optics and how to order the right coding.
5 min read
Your switch says unsupported transceiver, err-disables the port or the link stays down. How to read what the switch sees, and fix it with the right coding.
5 min read
What the SFP port on your switch is, what an SFP module does, and how to choose one in five steps: speed, fiber type, reach, connector and coding.
5 min read
SFP LX vs SX and 10GBASE-SR vs LR: what each reach code means, which come from IEEE 802.3, which fiber and wavelength they need, and how to choose.
6 min read
SFP vs SFP+, SFP28 vs SFP+ and QSFP28 vs QSFP+: what the difference is, which module works in which port, and how to get from QSFP28 to SFP28.
5 min read
Your optic reads -14.2 dBm. Good or bad? Receive sensitivity and overload per optic type, how much margin to keep, and what to fix in which order.
6 min read
Where do our optics come from, who tests them and what happens when one isn't right? On Solid Optics, testing, lifetime warranty and how we count RMAs.
5 min read
Two BiDi optics in and no link? What U and D, 1310/1490, 1270/1330 and BX10/20/40 mean, what the standard actually says, plus an ordering checklist.
5 min read
Your switch logs an Rx power low alarm. How to read DOM/DDM on Cisco, Juniper, Arista and MikroTik, what the values mean and where to look first.
5 min read
Your dashboard shows DOM critical or a laser bias current high alarm. What the four thresholds mean, who sets them and the order to fix it in.
5 min read
Supply chain security for transceivers: grey market, coding, per-item test reports and what NIS2 requires. Includes a practical buyer's checklist.
5 min read
BiDi or duplex? How a BiDi transceiver works over a single fiber, when it actually pays off, when duplex is the smarter call, and the mistakes to avoid.
5 min read
Dead transceiver at 4 pm? Which spare optics to keep ready, what to record per port, and how to get a replacement in your rack the same day.
5 min read