Your Catalyst or Nexus says 'unsupported transceiver' and the port goes err-disabled. Below you'll find, per transceiver, which Cisco part number it replaces, how Cisco treats third-party optics and when you do or don't need that hidden command.
Cisco IOS, IOS-XE and NX-OS read the module's vendor ID and checksum on insertion. Without Cisco coding you usually get an 'unsupported transceiver' message and the port goes err-disabled; 'service unsupported-transceiver' is a hidden, unsupported command. With Cisco coding the switch recognises the module as a Cisco optic and that command isn't needed.
Applies to: Catalyst, Nexus, ISR, ASR
Coded for Cisco before shipping. Click a transceiver for price, stock and specifications.
| Transceiver | Standard | Reach | Replaces Cisco |
|---|---|---|---|
| Cisco SFP-GE-S | SFP 1000BASE-SX | 550 m (multimode) |
|
| Cisco SFP-1G-LX | SFP 1000BASE-LX | 10 km |
|
| Cisco GLC-EX-SMD | SFP 1000BASE-EX | 40 km |
|
| Cisco GLC-ZX-SMD | SFP 1000BASE-ZX | 80 km |
|
| Cisco SFP-10G-SR | SFP+ 10GBASE-SR | 300 m (OM3) |
|
| Cisco SFP-10G-LR | SFP+ 10GBASE-LR | 10 km |
|
| Cisco SFP-10G-ER | SFP+ 10GBASE-ER | 40 km |
|
| Cisco SFP-10G-ZR | SFP+ 10GBASE-ZR | 80 km |
|
| Cisco SFP-25G-SR | SFP28 25GBASE-SR | 100 m (OM4) |
|
| Cisco SFP-25G-LR | SFP28 25GBASE-LR | 10 km |
|
| Cisco QSFP-40G-LR4-LC | QSFP+ 40GBASE-LR4 | 10 km |
|
| Cisco QSFP-40G-ER4-LC | QSFP+ 40GBASE-ER4 | 40 km |
|
| Cisco QSFP-100G-LR4-LC | QSFP28 100GBASE-LR4 | 10 km |
|
| Cisco QSFP-100G-DR1 | QSFP28 100GBASE-DR | 500 m |
|
SFP 1000BASE-SX, 550 m (multimode)
Replaces Cisco: SFP-GE-S, GLC-SX-MMD
SFP 1000BASE-LX, 10 km
Replaces Cisco: GLC-LH-SMD, SFP-GE-L
SFP 1000BASE-EX, 40 km
Replaces Cisco: GLC-EX-SMD
SFP 1000BASE-ZX, 80 km
Replaces Cisco: GLC-ZX-SMD, SFP-GE-Z
SFP+ 10GBASE-SR, 300 m (OM3)
Replaces Cisco: SFP-10G-SR, SFP-10G-SR-S
SFP+ 10GBASE-LR, 10 km
Replaces Cisco: SFP-10G-LR, SFP-10G-LR-S
SFP+ 10GBASE-ER, 40 km
Replaces Cisco: SFP-10G-ER, SFP-10G-ER-S
SFP+ 10GBASE-ZR, 80 km
Replaces Cisco: SFP-10G-ZR, SFP-10G-ZR-S
SFP28 25GBASE-SR, 100 m (OM4)
Replaces Cisco: SFP-25G-SR-S
SFP28 25GBASE-LR, 10 km
Replaces Cisco: SFP-10/25G-LR-S
QSFP+ 40GBASE-LR4, 10 km
Replaces Cisco: QSFP-40G-LR4, QSFP-40G-LR4-S
QSFP+ 40GBASE-ER4, 40 km
Replaces Cisco: QSFP-40G-ER4
QSFP28 100GBASE-LR4, 10 km
Replaces Cisco: QSFP-100G-LR4-S
QSFP28 100GBASE-DR, 500 m
Replaces Cisco: QSFP-100G-DR-S
On IOS and IOS-XE you can let an uncoded module through with two commands in global configuration. The first is hidden and unsupported by Cisco; TAC may ask you to reproduce an issue with a genuine optic.
service unsupported-transceiver
no errdisable detect cause gbic-invalidWith Cisco coding you don't need these commands: the switch sees the module as a Cisco optic. That's why we code every module before it ships.
What Cisco itself supports is in Cisco's own documentation: Cisco Transceiver Module Group (TMG) Compatibility Matrix.
It only lists genuine Cisco parts. Look up the part number and order the compatible version listed next to the same number in the table here.
No. With Cisco coding, IOS, IOS-XE or NX-OS reads the module as a Cisco optic and the port stays up. The command is only needed for uncoded (MSA) modules, and Cisco doesn't support it.
Your contract on the switch stays valid. If a fault points at the optic, Cisco TAC may ask you to reproduce it with a genuine Cisco module. With a coded, tested module that rarely comes up in practice.
Optically it has the same specifications as the Cisco part: standard, wavelength and reach. We program the Cisco coding before shipping and test every module before it leaves, with a test report. You get a lifetime warranty from Solid Optics, a Dutch company.
Usually, yes. For most transceivers in the shop you pick Cisco in the Coding field on the product page; this table only shows the most searched Cisco part numbers. Not sure which version you need? Email the part number to sales@fibernxt.nl and we'll find the match.