Cisco compatible Solid Optics SFP-1G-ZX-SO transceiver

On backorder – delivery in ± 2 business days

Compatible with Cisco GLC-ZX-SMD, SFP-GE-Z · SFP - 1000BASE-ZX - 80 km - 1550 nm - OS2

Distance
Coding

Pick the vendor of your switch or router, for example Juniper. We code the module for that platform before shipping, at no extra cost. MSA (Generic) is for equipment without a vendor check.

Available coded for 21 vendors

Cisco, Juniper, Brocade, Arista, Huawei, HPE, Aruba (HPE), Dell, Extreme, Nokia, Mellanox/NVIDIA, Alcatel-Lucent, Fortinet, Palo Alto Networks, Ciena, Calix, MikroTik, Ubiquiti, Netgear, D-Link and Allied Telesis. Vendor not listed? Ask us.

Configuration
Distance
80 km
SKU
GLC-ZX-SMD-SO
Specifications
General
Form factor
SFP
Data rate
1 Gb/s
Standard
1000BASE-ZX
Media
OS2 (single-mode)
Connector
LC duplex
Reach
80 km
DOM/DDM
Yes
Optical
Wavelength
1550 nm
TX power
0 to 5 dBm
RX sensitivity
-24 dBm
RX overload
-3 dBm
Power budget
24 dB
Environment
Operating temperature
0 to 70 °C (COM)
Download datasheet (PDF)
27,00 €
excl. VAT

32,67 € incl. VAT

Pricing is based on your current configuration.

On backorder – delivery in ± 2 business days
1

Nxt-Level Service

We offer same-day delivery and installation to keep your infrastructure up and running without delay.

Same-day Amsterdam

≤ 45km from Almere

We deliver to datacenters at Science Park, Zuidoost and Schiphol-Rijk, incl. Equinix, Digital Realty, Nikhef and Maincubes.

Same-day NL

> 45km from Almere

Urgent delivery available for other datacenters or customer sites.

Optics from Solid Optics

  • Lifetime warranty from Solid Optics on every transceiver
  • A test report with every unit
  • Tested on the platform the optic is meant for
  • Not sure? We test on your equipment first
  • Ships from Almere, same-day delivery in Amsterdam available
See our services →

Cisco coding for the GLC-ZX-SMD

We program this GLC-ZX-SMD with Cisco coding before shipping, at no extra cost. Your Cisco equipment (Catalyst, Nexus, ISR, ASR) then sees it as its own optic, just like a GLC-ZX-SMD. Optically it's the same SFP transceiver: 1000BASE-ZX, up to 80 km over OS2.

Cisco IOS, IOS-XE and NX-OS read the module's vendor ID and checksum on insertion. Without Cisco coding you usually get an 'unsupported transceiver' message and the port goes err-disabled; 'service unsupported-transceiver' is a hidden, unsupported command. With Cisco coding the switch recognises the module as a Cisco optic and that command isn't needed.

Replaces these Cisco part numbers
  • GLC-ZX-SMD
  • SFP-GE-Z

Need another coding or generic (MSA)? All specs and codings are on GLC-ZX-SMD transceiver

All Cisco compatible transceivers

Compatible means: the same optical specs and Cisco coding, not an original Cisco product. Brand and part names belong to their owners and are shown for comparison.

About the GLC-ZX-SMD

The GLC-ZX-SMD is an SFP transceiver for 1000BASE-ZX: 1 Gb/s over single-mode fiber (OS2) up to 80 km, at 1550 nm, with LC duplex connector and DOM/DDM monitoring. Available generic (MSA) or pre-coded for 21 vendors, including Cisco, Juniper and Brocade: pick your equipment's vendor under Coding and we code it before shipping, at no extra cost. Tested, with test report and lifetime warranty.

Matching cable: OS2 LC-LC patch cable

Also known as: GLC-ZX-SMD - SFP 1000BASE-ZX - SFP ZX - 1G ZX - 1G SFP 80 km

GLC-ZX-SMD by vendor

Same transceiver, pre-coded for your platform. Each vendor shows the original part number it replaces.

  • Cisco GLC-ZX-SMD

SFP-1G: all versions

VersionStandardReachWavelengthMediaPrice excl. VAT
SFP-GE-S1000BASE-SX550 m850 nmOM311,50 €Backorder
SFP-1G-LX1000BASE-LX10 km1310 nmOS212,00 €Backorder
GLC-EX-SMD1000BASE-EX40 km1310 nmOS218,00 €Backorder
GLC-ZX-SMD1000BASE-ZX80 km1550 nmOS227,00 €Backorder

Related products