We program this QSFP-100G-LR4-LC with Cisco coding before shipping, at no extra cost. Your Cisco equipment (Catalyst, Nexus, ISR, ASR) then sees it as its own optic, just like a QSFP-100G-LR4-S. Optically it's the same QSFP28 transceiver: 100GBASE-LR4, up to 10 km over OS2.
Cisco IOS, IOS-XE and NX-OS read the module's vendor ID and checksum on insertion. Without Cisco coding you usually get an 'unsupported transceiver' message and the port goes err-disabled; 'service unsupported-transceiver' is a hidden, unsupported command. With Cisco coding the switch recognises the module as a Cisco optic and that command isn't needed.
Replaces these Cisco part numbers Need another coding or generic (MSA)? All specs and codings are on QSFP-100G-LR4-LC transceiver
All Cisco compatible transceivers
Compatible means: the same optical specs and Cisco coding, not an original Cisco product. Brand and part names belong to their owners and are shown for comparison.
The QSFP-100G-LR4-LC is a QSFP28 transceiver for 100GBASE-LR4: 100 Gb/s over single-mode fiber (OS2) up to 10 km, with LC duplex connector and DOM/DDM monitoring. Replaces QSFP-100G-LR4-S, JNP-QSFP-100G-LR4, QSFP-100G-LR4 and MMA1L10-CR, among others. Available generic (MSA) or pre-coded for 21 vendors, including Cisco, Juniper and Brocade: pick your equipment's vendor under Coding and we code it before shipping, at no extra cost. Tested, with test report and lifetime warranty.
Matching cable: OS2 LC-LC patch cable
Also known as: QSFP-100G-LR4-LC - QSFP28 100GBASE-LR4 - QSFP28 LR4 - 100G LR4 - 100G QSFP28 10 km
Same transceiver, pre-coded for your platform. Each vendor shows the original part number it replaces.