Solid Optics 100G QSFP28 DAC cable (passive)

In stock
Length
Coding

Pick the vendor of your switch or router, for example Juniper. We code the module for that platform before shipping, at no extra cost. MSA (Generic) is for equipment without a vendor check.

Available coded for 21 vendors

Cisco, Juniper, Brocade, Arista, Huawei, HPE, Aruba (HPE), Dell, Extreme, Nokia, Mellanox/NVIDIA, Alcatel-Lucent, Fortinet, Palo Alto Networks, Ciena, Calix, MikroTik, Ubiquiti, Netgear, D-Link and Allied Telesis. Vendor not listed? Ask us.

Configuration
Length
2 m
SKU
QSFP28-100G-CU2M-SO
Specifications
General
Form factor
QSFP28
Data rate
100 Gb/s
Standard
100GBASE-CR4
Media
Twinax
Connector
Fixed (integrated)
Environment
Operating temperature
0 to 70 °C (COM)
Cable
Length
2 m
Download datasheet (PDF)
54,00 €
excl. VAT

65,34 € incl. VAT

Pricing is based on your current configuration.

3 in stock
1

Ordering more than we have in stock? We backorder the rest – delivery in ± 5 business days.

Nxt-Level Service

We offer same-day delivery and installation to keep your infrastructure up and running without delay.

Same-day Amsterdam

≤ 45km from Almere

We deliver to datacenters at Science Park, Zuidoost and Schiphol-Rijk, incl. Equinix, Digital Realty, Nikhef and Maincubes.

Same-day NL

> 45km from Almere

Urgent delivery available for other datacenters or customer sites.

100G DAC cable: short, low-power and fast

This passive DAC cable connects two QSFP28 ports at 100G (100GBASE-CR4) without optics or patch cables. It uses four lanes of 25 Gb/s in each direction. For spine-leaf within the rack, switch to server or stacking two switches, it is the lowest-power and cheapest 100G link.

Length: 0.5 to 5 m

IEEE 802.3bj targets 5 m for passive 100G DAC. We supply 0.5, 1, 2 and 5 m. The longer the cable, the thicker the wire: a 100G DAC is stiff, with a bend radius of around ten times its diameter. Keep that in mind in a full rack and don't pick it longer than needed. The patch cable length calculator helps you pick the right length.

FEC and compatibility

At 100G over copper, RS-FEC should be on at both ends; without FEC you see errors on longer cables or the link doesn't come up. Most switches do this automatically for a DAC, but check it if a link stays down.

A DAC identifies itself to the switch with a vendor ID, just like a transceiver. Pick your equipment's vendor under Coding. Connecting two vendors, for example a switch to a NIC from another brand? Contact customer service and we'll work out which coding works at both ends.

When not to

  • Longer than 5 m, or to another rack: pick an AOC or two QSFP28 optics with a patch cable.
  • To four 25G ports: you need a breakout cable, QSFP28 to 4× SFP28. We supply breakouts on request.

Breakout and port settings

Plugged in the DAC and the link stays down? Check that both ports are set to 100G, not to breakout (4× 25G) or 40G. Some switches remember the port mode from a previous cable. Also check that both ends use the same FEC mode. After that, reseat the cable at both ends: a half-inserted QSFP28 gives exactly the same symptoms as a broken cable.

Frequently asked questions

How long can a passive 100G DAC cable be?

IEEE 802.3bj targets 5 m. We supply 0.5, 1, 2 and 5 m. Need longer? Pick an AOC or two QSFP28 optics with a patch cable.

Does FEC need to be on for a 100G DAC?

Yes, RS-FEC should be on at both ends. Most switches do this automatically for a DAC; if the link stays down, check the FEC setting.

Can I use a 100G DAC to reach four 25G ports?

Not with this cable. For that you need a breakout cable from QSFP28 to 4× SFP28, and a switch port that supports breakout.

Which length do you need?

Enter rack, U position and route. You get the cable length, rounded up to a length we stock.

Related products