OM3 LC-LC: multimode for 1G and 10G
This patch cable connects two LC duplex ports over OM3 multimode fiber (50/125 µm). It is the cable between SR and SX optics, for patch panels and for links within a server room. LC/UPC at both ends, a 2 mm LSZH jacket and available in lengths from 0.5 to 25 m.
How far do you get over OM3?
On multimode, the combination of optic and fiber sets the distance:
- 1000BASE-SX: 550 m.
- 10GBASE-SR: 300 m over OM3, 400 m over OM4.
- 25GBASE-SR: 70 m over OM3, 100 m over OM4.
In a server room or data center a patch cable never gets near those distances; the limit only matters for fixed cabling between rooms. Installing new, or want room for 25G? Pick the OM4 LC-LC patch cable. OM3 and OM4 are interchangeable: same connectors, same optics.
Only for multimode optics
Use OM3 with SR and SX optics, such as the 10G SFP+ transceivers in the SR version. LR, LX and ER optics and our BiDi modules belong on single-mode fiber; for that there is the OS2 LC-LC patch cable. A single-mode optic on multimode often does give link, but with a fluctuating light level and errors you only notice later. The difference is explained in single-mode vs multimode.
LC duplex, UPC and LSZH
Duplex means two fibers in one cable: one to transmit, one to receive. Both ends are LC/UPC, the common polish for data center optics. The LSZH jacket gives little smoke and no toxic halogens in a fire; in server rooms and offices that is often a requirement.
Length and care
Pick the length in the selector: 0.5, 1, 1.5, 2, 5, 7, 15, 20 or 25 m. The patch cable length calculator works out your route and rounds up to a length we supply. Keep the dust caps on until you install the cable and clean a used connector before plugging it into an optic. Getting CRC errors? Look at the patch first: a dirty or damaged connector is the most common cause.



