Aruba compatible Solid Optics SFP-1G-LX-SO transceiver

On backorder – delivery in ± 2 business days

Replaces Aruba J4859D, J4859C · SFP - 1000BASE-LX - 10 km - 1310 nm - OS2

Distance
Coding

Pick the vendor of your switch or router, for example Juniper. We code the module for that platform before shipping, at no extra cost. MSA (Generic) is for equipment without a vendor check.

Available coded for 21 vendors

Cisco, Juniper, Brocade, Arista, Huawei, HPE, Aruba (HPE), Dell, Extreme, Nokia, Mellanox/NVIDIA, Alcatel-Lucent, Fortinet, Palo Alto Networks, Ciena, Calix, MikroTik, Ubiquiti, Netgear, D-Link and Allied Telesis. Vendor not listed? Ask us.

We ship a genuine HPE/Aruba-licensed opticWe send an optic properly licensed and coded for HPE/Aruba. Because that coding is licensed, it can't later be re-coded to another vendor and back to HPE/Aruba — but it works fine in non-HPE/Aruba equipment.
Configuration
Distance
10 km
SKU
SFP-1G-LX-SO
Specifications
General
Form factor
SFP
Data rate
1 Gb/s
Standard
1000BASE-LX
Media
OS2 (single-mode)
Connector
LC duplex
Reach
10 km
DOM/DDM
Yes
Optical
Wavelength
1310 nm
TX power
-10 to -3 dBm
RX sensitivity
-20 dBm
RX overload
-3 dBm
Power budget
10 dB
Environment
Operating temperature
0 to 70 °C (COM)
Download datasheet (PDF)
12,00 €
excl. VAT

14,52 € incl. VAT

Pricing is based on your current configuration.

On backorder – delivery in ± 2 business days
1

Nxt-Level Service

We offer same-day delivery and installation to keep your infrastructure up and running without delay.

Same-day Amsterdam

≤ 45km from Almere

We deliver to datacenters at Science Park, Zuidoost and Schiphol-Rijk, incl. Equinix, Digital Realty, Nikhef and Maincubes.

Same-day NL

> 45km from Almere

Urgent delivery available for other datacenters or customer sites.

Optics from Solid Optics

  • Lifetime warranty from Solid Optics on every transceiver
  • A test report with every unit
  • Tested on the platform the optic is meant for
  • Not sure? We test on your equipment first
  • Ships from Almere, same-day delivery in Amsterdam available
See our services →

Aruba coding for the SFP-1G-LX

We program this SFP-1G-LX with Aruba coding before shipping, at no extra cost. Your Aruba equipment (CX 6300, 6400, 8360, 2930F/M, 3810M) then sees it as its own optic, just like a J4859D. Optically it's the same SFP transceiver: 1000BASE-LX, up to 10 km over OS2.

ArubaOS-CX and ArubaOS-Switch only accept modules with Aruba/HP coding; a generic module gives 'unsupported transceiver' and the port stays down. With Aruba coding the module works as an Aruba optic. Note: some CX models need a separate setting or licence for third-party modules, see the note under Coding.

Replaces these Aruba part numbers
  • J4859D
  • J4859C

Need another coding or generic (MSA)? All specs and codings are on SFP-1G-LX transceiver

All Aruba compatible transceivers

Compatible means: the same optical specs and Aruba coding, not an original Aruba product. Brand and part names belong to their owners and are shown for comparison.

About the SFP-1G-LX

The SFP-1G-LX is an SFP transceiver for 1000BASE-LX: 1 Gb/s over single-mode fiber (OS2) up to 10 km, at 1310 nm, with LC duplex connector and DOM/DDM monitoring. Replaces GLC-LH-SMD, EX-SFP-1GE-LX, JD119B and J4859D, among others. Available generic (MSA) or pre-coded for 21 vendors, including Cisco, Juniper and Brocade: pick your equipment's vendor under Coding and we code it before shipping, at no extra cost. Tested, with test report and lifetime warranty.

Matching cable: OS2 LC-LC patch cable

Also known as: SFP-1G-LX - SFP 1000BASE-LX - SFP LX - 1G LX - 1G SFP 10 km

SFP-1G-LX by vendor

Same transceiver, pre-coded for your platform. Each vendor shows the original part number it replaces.

SFP-1G: all versions

VersionStandardReachWavelengthMediaPrice excl. VAT
SFP-GE-S1000BASE-SX550 m850 nmOM311,50 €Backorder
SFP-1G-LX1000BASE-LX10 km1310 nmOS212,00 €Backorder
GLC-EX-SMD1000BASE-EX40 km1310 nmOS218,00 €Backorder
GLC-ZX-SMD1000BASE-ZX80 km1550 nmOS227,00 €Backorder

Related products