Rechenzentrum

Need an optic today in an Amsterdam data center? How same-day works

Dead optic or a turn-up that has to happen today? What to tell us, how to pick the coding and how the optic gets from receiving into your rack.

5 Min. LesezeitVon Yvan Watchman

An optic in your Amsterdam rack has died, or a new link has to go live today and the right module isn't on the shelf. You want it in the port before the day is out. This article explains how that works with us: what to tell us so we send the right part first time, how to pick the coding, how the optic gets into the data center, and what to set up so the next time is even quicker.

Call first, then order

Need it today? Call before you order and we'll arrange same-day delivery. It sounds old-fashioned, but it saves you time: you get a real engineer on the line, and together we check right away that the type, the coding and the destination are correct.

We ship from Almere. Within 45 km are the data centers at Science Park, Zuidoost and Schiphol-Rijk (including Equinix, Digital Realty, Nikhef and Maincubes); we deliver there the same day. We also deliver to every Digital Realty site in the Amsterdam area. Rush delivery further afield is possible too.

What we need from you

The more detail you have when you call, the smaller the chance an optic turns up that doesn't fit. Have this ready:

  • Note the make, model and software version of the switch or router.
  • Give us the optic type: form factor, speed and reach, for example SFP+ 10G LR.
  • Check what sits at the far end of the link, especially with BiDi or a different wavelength.
  • Tell us whether you need patch cords too: connector, single-mode or multimode, length.
  • Give us the data center, building, and your suite, cage and rack.
  • Agree who receives it: you, the data center's remote hands, or one of our engineers.
  • Pass on the name and number of whoever is reachable on site or remotely.

That software version isn't a formality: which optics a platform supports can change from release to release.

Coding: choose it now, not at the rack

Many switches read the vendor ID from the optic's EEPROM and keep the port down if they don't recognise it. So when you order, you pick the coding for your platform and we code the module before it ships. How that works, and what it means for your support contract, is covered in third-party optics and coding.

Not sure? Just say so. If you're unsure whether a module and switch will get along, we test on your equipment first. An optic that gets rejected at the rack costs you more time than that one extra question.

How the optic gets from the loading dock into your rack

A data center isn't an office with a letterbox. Every operator has its own procedure, so check the one for your site. Examples from Equinix's and Digital Realty's public documentation:

  • Announce it — Equinix asks for inbound shipments to be scheduled at least 24 hours ahead in its Customer Portal, with carrier, tracking number and cage number. Without that order, a shipment may be rejected. With same-day you often can't make that 24 hours: open the order as soon as you can, or approve it as an unannounced shipment. A small unannounced shipment (one air bill, up to five boxes and 27.2 kg, carried by one person, with the sender address shown) only goes to your cage once you approve it in the portal. So have someone with the right portal permissions standing by.
  • Loading dock and receiving — without our installation service, the courier delivers to the loading dock or receiving area, not to your rack. From there you collect it yourself or have it brought up.
  • Remote hands — No one of your own nearby? Have the data center fit the optic. At Equinix this is Smart Hands, which covers jobs such as equipment replacement or a loopback test on a transceiver. Digital Realty handles remote hands as tickets in its customer portal. State the exact port, device and label.
  • With our installation service — book installation and our engineer brings the optic into your rack and fits or patches it. Register them as a visitor in advance. At Equinix that's a work visit with cage, date, time and name. On-site installation and patching are listed under our services.

Making next time quicker

Most of the time goes into working things out and announcing the delivery, not the drive. So keep one page per site with the checklist above already filled in: platforms, software versions, the optic types per critical port, the receiving address and who holds portal permissions. Then the call with us is a matter of reading it out.

Rather not depend on a drive? With a Recovery Kit, a set of spare modules and cables sits at your site, backed by a rush-delivery arrangement. With a Stand-by SLA, an engineer is on stand-by to be on site within 4 hours of a fault, within agreed time windows. For keeping your own spares in order, read dead transceiver? How to sort spares.

What to do now

Port down right now? Call us with the checklist details to hand, and announce the delivery in your data center's portal at the same time. Our optics, such as the 10G SFP+ and 25G SFP28 modules, come from Solid Optics, a Dutch company. They're tested in the Netherlands, including on customer equipment, and carry a lifetime warranty.

Yvan Watchman

Über den Autor

Yvan Watchman

Gründer von FiberNxt und Xyphen IT

Yvan Watchman ist Gründer von FiberNxt und Xyphen IT. Er baut und betreibt seit Jahren Netzwerke und Rechenzentrumsinfrastruktur in und um Amsterdam.

LinkedIn-Profil

Passende Produkte und Dienstleistungen

Häufig gestellte Fragen

Where do you deliver the same day?

Within 45 km of Almere: the data centers at Science Park, Zuidoost and Schiphol-Rijk, including Equinix, Digital Realty, Nikhef and Maincubes. Rush delivery further afield is possible too. Call us and you'll know straight away what can be done today.

Can the data center install the optic for me?

Yes, most data centers offer remote hands. You open a ticket in your data center's portal and state exactly which port it is. We make sure the optic, with the right coding, is waiting at receiving.

What if I'm not sure which coding I need?

Give us the make, model and software version of your switch and we'll help you choose. Still in doubt? Then we test on your equipment first.

Weiterlesen

November 19, 2026, 5 Min. LesezeitOrdering a cross-connect in Amsterdam: LOA, meet-me room and what goes wrongConnecting your rack to a carrier, AMS-IX or cloud on-ramp? What a cross-connect is, what the LOA says, real lead times and how to test the link.November 19, 2026, 4 Min. LesezeitA spares check for the new year: what's on the shelf, and is the coding still right?Yearly spares check per site: count your spare optics, check coding after upgrades and hardware swaps, test them and review your SLAs. With a printable checklist.November 19, 2026, 5 Min. LesezeitTesting optics before a rollout: catch the duds before your maintenance windowRolling out dozens or hundreds of optics? How to test coding, recognition, DOM, link and errors up front, how long to soak them and what to record per port.November 19, 2026, 5 Min. LesezeitThird-party optics and coding: how to order a transceiver your switch acceptsWhat coding in a transceiver's EEPROM does, why switches check it, what you actually risk with third-party optics and how to order the right coding.November 19, 2026, 5 Min. LesezeitTransceiver not recognized: how to tell if it's the codingYour switch says unsupported transceiver, err-disables the port or the link stays down. How to read what the switch sees, and fix it with the right coding.October 9, 2026, 5 Min. LesezeitDead transceiver? How to sort spares and same-day replacementDead transceiver at 4 pm? Which spare optics to keep ready, what to record per port, and how to get a replacement in your rack the same day.