Yvan Watchman

Yvan Watchman

Gründer von FiberNxt und Xyphen IT

Yvan Watchman ist Gründer von FiberNxt und Xyphen IT. Er baut und betreibt seit Jahren Netzwerke und Rechenzentrumsinfrastruktur in und um Amsterdam.

LinkedIn-Profil

Artikel von Yvan Watchman

November 19, 2026, 5 Min. Lesezeit100G BiDi (QSFP28): 100G over one fiber, and how it differs from 1G and 10GOnly one fiber but you need 100G? How a 100G BiDi QSFP28 works, how it differs from 1G and 10G BiDi, BX20 or BX40, FEC, attenuators and what to order.November 19, 2026, 5 Min. LesezeitChoosing 100G single-mode optics: DR1, FR1, LR1, LR4 or CWDM4?LR4, CWDM4 or single-lambda DR1, FR1 and LR1? How they differ in lanes, PAM4 and FEC, which ones interoperate, and what to pick with 400G on the roadmap.November 19, 2026, 5 Min. LesezeitChoosing 400G: QSFP-DD or OSFP, and which optic?Planning a 400G spine/leaf or DCI upgrade? How to choose between QSFP-DD and OSFP and between SR8, DR4, XDR4, FR4, LR4 and ZR, with breakout, power and FEC.November 19, 2026, 5 Min. LesezeitCleaning fiber connectors: inspect, clean, and what never to doHigh loss, CRC errors, or about to patch new links? How to inspect and clean connectors, bulkheads and transceiver ports, with a printable checklist.November 19, 2026, 5 Min. LesezeitCopper SFP (RJ45): heat, power and reach of 1G-T and 10G-TRJ45 in an SFP or SFP+ port? What a 1G-T or 10G-T module draws, how hot it runs, how far it reaches, and when a DAC or fiber is the smarter choice.November 19, 2026, 6 Min. LesezeitCRC errors on a fiber link: check the patch before the opticCRC errors climbing on your uplink? Read DOM on both ends, find the real cause, and swap the transceiver last. A troubleshooting order backed by data.November 19, 2026, 5 Min. LesezeitOrdering a cross-connect in Amsterdam: LOA, meet-me room and what goes wrongConnecting your rack to a carrier, AMS-IX or cloud on-ramp? What a cross-connect is, what the LOA says, real lead times and how to test the link.November 19, 2026, 5 Min. LesezeitCWDM vs DWDM: wavelengths, channels and distance explainedOne fiber pair and not enough capacity? How CWDM and DWDM differ in wavelengths, channels, distance and cost, and when to pick which.November 19, 2026, 5 Min. LesezeitDAC vs AOC vs optics: what to use in the rack and across the rowPassive DAC, active copper, AOC or transceivers with a patch cord? Reach, power, cost, cable bulk, breakout and coding compared, plus a checklist.November 19, 2026, 5 Min. LesezeitLatency: why a DAC beats optics (and when it actually matters)DAC, AOC or optics in the rack? Where latency in a short link really comes from, why a passive DAC wins, and when those nanoseconds are worth chasing.November 19, 2026, 5 Min. LesezeitData center cable labeling: a scheme that stays correctA TIA-606 labeling scheme for rack, patch panel, port and patch cable: what goes on the label, what goes in NetBox, and how remote hands find the right cable.November 19, 2026, 5 Min. LesezeitEnable third-party optics on Cisco, Nexus, Meraki, Aruba, Juniper and AristaSwitch rejects your optic? The command or setting per platform to allow third-party optics, what it costs you in support, and why the right coding is better.November 19, 2026, 5 Min. LesezeitFEC explained: why your 25G or 100G link won't come up (and what RS-FEC costs)Light levels fine, link still down or full of errors? It's often FEC. Which link needs which FEC, why a mismatch kills the link, and how to read the counters.November 19, 2026, 4 Min. LesezeitFiber patch cable color codes: what yellow, aqua, orange and violet meanYellow, aqua, orange, violet, a blue or green connector: what fiber patch cable colors mean under TIA-598, and why you still read the print on the jacket.November 19, 2026, 4 Min. LesezeitStandard fiber patch cable lengths, and how to measure the right oneWhich fiber patch cable lengths exist, how to measure patch panel to switch, and why one size up beats one that's 20 cm short.November 19, 2026, 5 Min. LesezeitG.657A vs G.652D: what bend radius means for your patch cordsG.657.A1, A2 or G.652.D on a single-mode patch cord? What the codes mean, which bend radius and macrobend limits apply, and what bend-insensitive won't fix.November 19, 2026, 5 Min. LesezeitLaser bias current: the early sign your optic is wearing outYour switch shows 38 mA laser bias current or a bias high alarm. What the number means, why there's no fixed normal and which pattern really points to wear.November 19, 2026, 5 Min. LesezeitLC vs SC, UPC vs APC: which patch cord fits your portLC/UPC, SC/APC, duplex or simplex: how to read the connector code, tell what's on your switch, ODF or fiber wall socket, and order the right patch cord.November 19, 2026, 5 Min. LesezeitMPO vs LC: when do MPO trunks and cassettes make sense?Planning 40G, 100G or 400G, or a dense row of racks? When MPO trunks with cassettes pay off, when duplex LC is enough, and where polarity goes wrong.November 19, 2026, 5 Min. LesezeitOptical power budget: will this optic make your link?An 8 km link with four patch points: will an LR do, or is it marginal? How to work out power budget, link loss and margin, with three worked examples.November 19, 2026, 4 Min. LesezeitSingle-mode vs multimode: OS2, OM3 and OM4 comparedOS2 or OM4, OM3 or OM4? Distances per standard, what optics and fiber really cost, and when you're better off running single-mode everywhere.November 19, 2026, 5 Min. LesezeitOwn router on KPN fiber: AON, GPON or XGS-PON, and which SFPRemove the KPN box and plug the fiber straight into your own router? How to tell AON, GPON and XGS-PON apart, which SFP or ONT you need and what to configure.November 19, 2026, 5 Min. LesezeitQSFP28 breakout: how to turn one 100G port into four 25G linksOne 100G port, four 25G servers or switches? When to pick a breakout DAC or AOC, when SR4 or PSM4 with an MPO fanout, and what to configure first.November 19, 2026, 5 Min. LesezeitNeed an optic today in an Amsterdam data center? How same-day worksDead optic or a turn-up that has to happen today? What to tell us, how to pick the coding and how the optic gets from receiving into your rack.November 19, 2026, 5 Min. LesezeitSFP not working? The checklist, from port to power budgetNo link, or a link that keeps flapping? A printable checklist in the right order: port, BiDi pair, reach, fiber, connectors, DOM, too much light and the swap test.November 19, 2026, 4 Min. LesezeitA spares check for the new year: what's on the shelf, and is the coding still right?Yearly spares check per site: count your spare optics, check coding after upgrades and hardware swaps, test them and review your SLAs. With a printable checklist.November 19, 2026, 5 Min. LesezeitTesting optics before a rollout: catch the duds before your maintenance windowRolling out dozens or hundreds of optics? How to test coding, recognition, DOM, link and errors up front, how long to soak them and what to record per port.November 19, 2026, 5 Min. LesezeitThird-party optics and coding: how to order a transceiver your switch acceptsWhat coding in a transceiver's EEPROM does, why switches check it, what you actually risk with third-party optics and how to order the right coding.November 19, 2026, 5 Min. LesezeitTransceiver not recognized: how to tell if it's the codingYour switch says unsupported transceiver, err-disables the port or the link stays down. How to read what the switch sees, and fix it with the right coding.November 19, 2026, 5 Min. LesezeitWhat is an SFP port and which module do you need?What the SFP port on your switch is, what an SFP module does, and how to choose one in five steps: speed, fiber type, reach, connector and coding.November 18, 2026, 6 Min. LesezeitReach codes decoded: SX, LX, SR, LR, ER, ZRSFP LX vs SX and 10GBASE-SR vs LR: what each reach code means, which come from IEEE 802.3, which fiber and wavelength they need, and how to choose.November 11, 2026, 5 Min. LesezeitSFP vs SFP+ vs SFP28 vs QSFP+ vs QSFP28: which form factor fits whereSFP vs SFP+, SFP28 vs SFP+ and QSFP28 vs QSFP+: what the difference is, which module works in which port, and how to get from QSFP28 to SFP28.November 6, 2026, 6 Min. LesezeitSFP Rx power: what dBm is normal, and when should you act?Your optic reads -14.2 dBm. Good or bad? Receive sensitivity and overload per optic type, how much margin to keep, and what to fix in which order.November 4, 2026, 5 Min. LesezeitWhy FiberNxt works with Solid OpticsWhere do our optics come from, who tests them and what happens when one isn't right? On Solid Optics, testing, lifetime warranty and how we count RMAs.October 28, 2026, 5 Min. LesezeitBiDi SFP pairs explained: U/D, 1310/1490, BX10/20/40 and why you always buy twoTwo BiDi optics in and no link? What U and D, 1310/1490, 1270/1330 and BX10/20/40 mean, what the standard actually says, plus an ordering checklist.October 24, 2026, 5 Min. LesezeitReading DOM/DDM: Rx power, thresholds and alarmsYour switch logs an Rx power low alarm. How to read DOM/DDM on Cisco, Juniper, Arista and MikroTik, what the values mean and where to look first.October 23, 2026, 5 Min. LesezeitDOM status critical or warning: what your switch is telling youYour dashboard shows DOM critical or a laser bias current high alarm. What the four thresholds mean, who sets them and the order to fix it in.October 21, 2026, 5 Min. LesezeitSupply chain security for optics: what NIS2 asks of your transceiversSupply chain security for transceivers: grey market, coding, per-item test reports and what NIS2 requires. Includes a practical buyer's checklist.October 14, 2026, 5 Min. LesezeitBiDi SFP vs duplex: which one to chooseBiDi or duplex? How a BiDi transceiver works over a single fiber, when it actually pays off, when duplex is the smarter call, and the mistakes to avoid.October 9, 2026, 5 Min. LesezeitDead transceiver? How to sort spares and same-day replacementDead transceiver at 4 pm? Which spare optics to keep ready, what to record per port, and how to get a replacement in your rack the same day.