What is BiDi, and why do you buy them in pairs?
A BiDi transceiver transmits and receives over a single fiber, on two different wavelengths. The U module transmits on the wavelength the D module receives and vice versa, so you always need one U and one D: two identical modules won't give you link.
You only have one free fiber between two sites, or you want to save one. A BiDi optic solves that: it puts transmit and receive on the same fiber, separated by colour. That only works if the two ends mirror each other, which is why you buy them as a pair.
U and D
The D side (downstream) and the U side (upstream) come from IEEE 802.3, where 1000BASE-BX10 was first defined. On your own point-to-point link it doesn't matter which end is U, as long as you have one of each. On a provider's AON fiber line the customer side is always U. Do record it in your documentation, so a spare will be the right one.
The pairs we supply
| Speed | Reach | U transmits / receives | D transmits / receives |
|---|---|---|---|
| 1G SFP | 20 and 40 km | 1310 / 1490 nm | 1490 / 1310 nm |
| 1G SFP | 80 km | 1490 / 1550 nm | 1550 / 1490 nm |
| 10G SFP+ | 20 and 40 km | 1270 / 1330 nm | 1330 / 1270 nm |
| 10G SFP+ | 80 km | 1490 / 1550 nm | 1550 / 1490 nm |
All modules have a simplex LC connector. For 100G there's a QSFP28 BiDi for 20 or 40 km. Note: the price of a BiDi pair is per module, so you order two.
When to use it, and when not
BiDi makes sense when fibers are scarce or expensive, such as leased dark fiber or a full duct. If you simply have two fibers, a duplex optic is simpler and cheaper. That trade-off is in BiDi vs duplex; the details on wavelengths and BX names in BiDi pairs explained. Order at 1G BiDi or 10G BiDi.
More questions on this
Can I pair a BX20-U with a BX40-D?
We advise against it. It only works if the wavelengths mirror exactly and the power levels match, and that differs per manufacturer. Order the same reach at both ends.
Does BiDi exist for multimode?
At 40G and 100G, yes, with two wavelengths around 850 to 900 nm over duplex multimode. At 1G and 10G, BiDi optics are single-mode.
Does BiDi work with a regular duplex optic at the other end?
No. A duplex optic transmits and receives on the same wavelength over two fibers. Both ends of a BiDi link must be BiDi, as a U/D pair.
Passende Produkte und Dienstleistungen
Further reading
- 100G BiDi (QSFP28): 100G over one fiber, and how it differs from 1G and 10G
Only one fiber but you need 100G? How a 100G BiDi QSFP28 works, how it differs from 1G and 10G BiDi, BX20 or BX40, FEC, attenuators and what to order.
- BiDi SFP pairs explained: U/D, 1310/1490, BX10/20/40 and why you always buy two
Two BiDi optics in and no link? What U and D, 1310/1490, 1270/1330 and BX10/20/40 mean, what the standard actually says, plus an ordering checklist.
- BiDi SFP vs duplex: which one to choose
BiDi or duplex? How a BiDi transceiver works over a single fiber, when it actually pays off, when duplex is the smarter call, and the mistakes to avoid.