Juniper compatible SFP-10G-SR transceiver

Juniper coding for the SFP-10G-SR

We program this SFP-10G-SR with Juniper coding before shipping, at no extra cost. Your Juniper equipment (EX, QFX, MX, SRX, ACX) then sees it as its own optic, just like a EX-SFP-10GE-SR. Optically it's the same SFP+ transceiver: 10GBASE-SR, up to 300 m over OM3.

Junos usually doesn't block third-party modules, but lists them in 'show chassis hardware' without a Juniper part number, may raise an 'unsupported optics' alarm and can limit JTAC support for that port. With Juniper coding the module reports as a Juniper optic, including DOM readout via 'show interfaces diagnostics optics'.

Need another coding or generic (MSA)? All specs and codings are on SFP-10G-SR transceiver

Compatible means: the same optical specs and Juniper coding, not an original Juniper product. Brand and part names belong to their owners and are shown for comparison.

About the SFP-10G-SR

The SFP-10G-SR is an SFP+ transceiver for 10GBASE-SR: 10 Gb/s over multimode fiber (OM3) up to 300 m, at 850 nm, with LC duplex connector and DOM/DDM monitoring. Available generic (MSA) or pre-coded for 21 vendors, including Cisco, Juniper and Brocade: pick your equipment's vendor under Coding and we code it before shipping, at no extra cost. Tested, with test report and lifetime warranty.

Matching cable: OM3 LC-LC patch cable

Also known as: SFP-10G-SR - SFP+ 10GBASE-SR - SFP+ SR - 10G SR - 10G SFP+ 300 m