SC to LC: from the FTU or patch panel to your SFP
This patch cable has SC/UPC at one end and LC/UPC at the other, over OS2 single-mode fiber. It is the cable you need when your fiber arrives on a blue SC port, such as a fiber provider's FTU or an SC patch panel, and your switch, router or firewall has an SFP with an LC connector.
At home or in the office: blue FTU and a BiDi SFP
On an AON fiber connection you can replace the provider's box with your own SFP module, usually a BiDi module: the GLC-BX-U20-SO. If your FTU is blue, it is SC/UPC and this cable fits. A green FTU is SC/APC: that needs an APC cable, not this one. Which module and cable your provider needs is in the tool which SFP do I need for my fiber connection.
Duplex cable, one fiber for BiDi
This cable is duplex: two fibers side by side. A BiDi module transmits and receives over one fiber, so you use one of the two. Plug the SC of that fiber into the FTU and the LC of the same fiber into the module; the second fiber stays free. If the connectors are held together by a clip, remove it. No link? Switch to the other fiber first: chances are you're using the SC and LC of different fibers.
In the data center
In server rooms you still come across SC, mainly on older patch panels and ODFs. With this cable you connect such a panel to a modern LC optic, using both fibers for a regular duplex optic such as 10GBASE-LR. If both ends are LC, take the OS2 LC-LC patch cable.
G.657A, LSZH and length
The fiber is G.657A: insensitive to tight bends, handy in a utility cupboard or a full cable tray. The jacket is 2 mm LSZH: little smoke and no halogens in a fire. We supply lengths from 0.5 to 35 m; pick what you need in the selector, or work out your route with the patch cable length calculator.



