10G AOC: when a DAC is too short
An AOC (active optical cable) is a fiber cable with a fixed SFP+ module at both ends. As with a DAC, you plug it into two ports and have a 10G link, without separate optics and a patch cable. The difference is the cable: inside runs multimode fiber (OM3) instead of copper. That makes it thinner, lighter and longer-reaching.
Length: 1 to 10 m
We supply this AOC in 1, 2, 3, 5, 7 and 10 m. A passive 10G DAC cable stops at 5 m, so the AOC is the choice for a link to the next rack or to the other end of a row. Not sure of the length? The patch cable length calculator works out your route and rounds up to a length we supply.
AOC, DAC or separate optics?
- DAC: copper, up to 5 m, lowest power and lowest price. Ideal within one rack.
- AOC: fiber, up to 10 m, thinner and more flexible than twinax. Draws more power than a DAC, because both ends have active optics.
- Two optics with a patch cable: for anything further or through a patch panel. More expensive, but you replace cable and module separately.
All options side by side are in AOC cables and DAC cables. More background in DAC vs AOC vs optics.
What to watch
An AOC is one piece. If one end fails, or you kink the cable, you replace the whole cable. So route it to the port in a wide curve, bundle with hook-and-loop straps instead of cable ties, and never pull the cable to take a connector out of the port: use the pull tab. The cable is specified for 0 to 70 °C, the regular range for data center equipment.
Coding and doubts
An AOC identifies itself to the switch like a transceiver, with a vendor ID in its EEPROM. If your switch only accepts cables with its own coding, ask us before you order and we'll check what works at both ends. The same applies when you connect two different vendors, such as a switch and a server.



